BJYJG - EC-801 WITH ACCELERATOR

  • MSDS: BJYJG
  • Manufacturer: 3M CO GENERAL OFFICES
  • Product Name: EC-801 WITH ACCELERATOR
  • National Stock Number: 8030-00-685-0915
Product Identification

Product ID:EC-801 WITH ACCELERATOR
MSDS Date:01/01/1990
FSC:8030
NIIN:00-685-0915
Kit Part:Y
MSDS Number: BJYJG

Responsible Party
3M CO. GENERAL OFFICES
3M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 612-733-1110

Info Phone: 612-733-1110

Cage: 76381

Contractor
MINNESOTA MINING AND MFG CO, DBA 3M
SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

Ingredients

POLYSULFIDE - VENDOR TRADE SECRED (V.T.S)

Fraction By Weight: 65-80%


PHENOL-FORMALDEHYDE POLYMER

CAS: 9003-35-4

Fraction By Weight: 1-10%


CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 1-10%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192


AMORPHOUS SILICA

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight: 1-10%

ACGIH TLV: 3 MG/M3 TWA


METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 1-10%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


41 GM/LITER

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE: LIQUID/VAPOR/IRRIT. DIRECT
CONTACT/ IRRIT. SKIN: IRRIT. CONTACT W/SKIN/EXTREME DIFFICULTY IN
CLEANUP. ABRASIVES/SOLVENTS FOR CLEANUP/SKIN DAMAGE. INHALE: NO
HAZARD ANTICIPATED. LOW SOLVENT LEVEL & EXTREME SLOW RELEASE
SHOULD NOT CREATE HAZ ENVIRON. VAPOR OVEREXPOS/RESPIRATORY SYSTEM
IRRIT. INGEST: DIGEST SYST IRRI
Effects of Overexposure:OVEREXPOSURE: LIGHT-HEADEDNESS, HEADACHE,
DIZZINESS, WEAKNESS, FATIGUE, AND ON EXTREME OVEREXPOSURE,
UNCONSCIOUSNESS. AVOID EYE CONTACT. AVOID REPEATED OR PROLONGED
SKIN CONTACT.

First Aid

First Aid:EYE CONTACT: FLUSH EYES WITH LARGE AMOUNTS OF WATER FOR AT
LEAST 10 MINUTES. CALL A PHYSICIAN. SKIN CONTACT: WASH THOROUGHLY
WITH SOAP AND WATER. INHALATION: REMOVE INDIVIDUAL TO FRESH AIR.
CALL A PHY SICIAN.

Fire Fighting

Flash Point:100F,38C
Extinguishing Media:CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH SELF-
CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING THIS
MATERIAL.
Unusual Fire/Explosion Hazard:N/K 6000-20000 POISE

Accidental Release

Spill Release Procedures:CONTAIN SPILL. CLEAN UP RESIDUE AND AREA OF
SPILL. PLACE RESIDUE IN CONTAINER (U.S. DEPT OF TRANSPORTATION
APPROVED IF WASTE IS TO BE SHIPPED.)

Handling

Handling and Storage Precautions:USE ONLY IN AREAS WITH ENOUGH AIR
MOVEMENT TO PREVENT VAPOR BUILDUP. KEEP CONTAINER TIGHTLY CLOSED
WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES OR CHEMICAL GOGGLES.
Supplemental Safety and Health
KEY1:F4.

Chemical Properties

HCC:F4
Spec Gravity:1.36
Solubility in Water:LOW
Appearance and Odor:BLACK, SULFUR ODOR
Percent Volatiles by Volume:3

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2 AND SULFUR COMPOUNDS WHEN
SUBJECTED TO EXCESSIVE HEAT OR FLAME.

Disposal

Waste Disposal Methods:MAY BE DISPOSED OF IN A SANITARY LANDFILL
ACCORDING TO LOCAL AND CURRENT U.S. ENVIRONMENTAL PROTECTION AGENCY
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.